Rear Engine Mount Bracket - 948TE

REMOVAL 

1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
2. Remove the belly pan. Refer to BELLY PAN, REMOVAL AND INSTALLATION .
3. Remove the rear engine mount insulator. Refer to INSULATOR, ENGINE MOUNT, REAR, REMOVAL AND INSTALLATION  .

   Courtesy of CHRYSLER GROUP, LLC

4. Remove the bolts (2) and the rear engine mount bracket (1).

INSTALLATION 

Courtesy of CHRYSLER GROUP, LLC

1. Install the rear engine mount bracket (1) and tighten the bolts (2) to the proper torque specification. Refer to TORQUE SPECIFICATIONS  .
2. Install the rear engine mount insulator. Refer to INSULATOR, ENGINE MOUNT, REAR, REMOVAL AND INSTALLATION  .
3. Install the belly pan. Refer to BELLY PAN, REMOVAL AND INSTALLATION .
4. Remove the support and lower the vehicle.