Set Condition

Condition One: 

• Positive engine torque is transmitted when no positive torque is commanded by the Transmission Control Module (TCM).
• The difference of the transmitted engine torque and the requested engine torque is greater than a calibrated threshold.

Condition Two: 

• Actual engine torque request and the delivered engine torque request sent via BUS is greater than a calibrated threshold.

Condition Three: 

• A positive engine torque request is sent via BUS and no positive torque request was calculated by the TCM.

Condition Four: 

• The engine torque for the calculated gear is less than a calibrated threshold.

Condition Five: 

• The difference between the actual engine torque and the requested negative engine torque is greater than a calibrated threshold.

Condition Six: 

• A negative engine torque request is sent via BUS and no negative torque request was calculated by the TCM.