LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1357 (Power Locks (Service Information)) >> Antenna, Passive Entry >> Removal And Installation >> Rear Fascia >> Installation

Rear Fascia: Installation

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the passive entry antenna and secure it with suitable rivets.
  2. Connect the wire harness connector to the antenna.
  3. Install the rear fascia. Refer to FASCIA, REAR, INSTALLATION .
  4. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals