LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1354 (Antilock Brake System (Abs) (Service Information)) >> Electrical >> Switch, Electronic Stability Program (Esp) >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

The Electronic Stability Control (ESC) may also be referred to as Electronic Stability Program (ESP) depending on the vehicle model year and configuration. Certain components may also reference ESP, ESC, or use the traction control symbol.

  1. Remove the Electric Park Brake (EPB) switch. Refer to SWITCH, ELECTRIC PARK BRAKE, REMOVAL .
    GC0191657Courtesy of CHRYSLER GROUP, LLC
  2. Remove the ESC switch screws (1).
  3. Remove the ESC switch.
scientia non olet · About LEMON Manuals