Removal And Installation: Installation
WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The Electronic Stability Control (ESC) may also be referred to as Electronic Stability Program (ESP) depending on the vehicle model year and configuration. Certain components may also reference ESP, ESC, or use the traction control symbol.
- Position the ESC switch to the bezel.
- Install and tighten the ESC switch screws (1).
- Install the Electric Park Brake (EPB) switch. Refer to SWITCH, ELECTRIC PARK BRAKE, INSTALLATION .