LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1355 (Base Brakes (Service Information)) >> Parking Brake >> Switch, Electric Park Brake >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the Electric Park Brake (EPB) switch to the floor console, install the EPB to floor console fasteners and tighten securely.
  2. Connect the EPB switch wire harness connector.
  3. Install the floor console. Refer to CONSOLE, FLOOR, INSTALLATION .
  4. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals