LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1333 (1.3L Cooling System) >> Transmission >> Tubes And Hoses, Transmission Oil Cooler >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front fascia. Refer to FASCIA, FRONT, REMOVAL .
    GC0169422Courtesy of CHRYSLER GROUP, LLC
  2. Release the transmission oil cooler lines (2) from the routing clip (1) located at the radiator fan shroud.
  3. Disconnect the transmission oil cooler lines from the transmission oil cooler.
  4. Disconnect the transmission oil cooler lines from the transmission. Refer to TRANSMISSION COOLER LINE QUICK CONNECT FITTING DISASSEMBLY/ASSEMBLY  .
  5. Remove the transmission oil cooler lines from the vehicle.
scientia non olet · About LEMON Manuals