LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1333 (1.3L Cooling System) >> Engine >> Sensor, Coolant Temperature >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the thermostat. Refer to THERMOSTAT, REMOVAL  .
    G00588868Courtesy of CHRYSLER GROUP, LLC
  2. Retract the clip (1a) and remove the engine coolant temperature sensor (1b).
scientia non olet · About LEMON Manuals