LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1332 (2.4L Cooling System) >> Transmission >> Tubes And Hoses, Transmission Oil Cooler >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the transmission cooler lines in the vehicle.
  2. Install the transmission cooler lines at the transmission fittings. Refer to TRANSMISSION COOLER LINE QUICK CONNECT FITTING DISASSEMBLY/ASSEMBLY  .
  3. Install the transmission cooler lines at the transmission oil cooler. Refer to TRANSMISSION COOLER LINE QUICK CONNECT FITTING DISASSEMBLY/ASSEMBLY  .
    GC0169422Courtesy of CHRYSLER GROUP, LLC
  4. Secure the transmission oil cooler lines (2) to the routing clip (1) at the radiator fan shroud.
  5. Check transmission fluid level. Refer to FLUID AND FILTER, STANDARD PROCEDURE .
  6. Install the front fascia. Refer to FASCIA, FRONT, INSTALLATION .
scientia non olet · About LEMON Manuals