LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1332 (2.4L Cooling System) >> Accessory Drive >> Belt, Serpentine >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
GC0153811Courtesy of CHRYSLER GROUP, LLC
  1. Inspect the serpentine belt and pulleys for damage.
  2. Rotate the belt tensioner (7) and install the serpentine belt (5).
  3. Install the front half of the right front wheelhouse splash shield. Refer to SHIELD, SPLASH, FRONT WHEELHOUSE, INSTALLATION .
  4. Install the tire and wheel assembly. Refer to INSTALLATION .
scientia non olet · About LEMON Manuals