LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1303 (948TE Automatic Transmission (Service Information)) >> Cover >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the cover plate with a NEW  gasket.
  2. Install the cover plate fasteners and tighten to the proper specification. Refer to TORQUE SPECIFICATIONS .
  3. Check the transmission fluid level. Refer to FLUID AND FILTER, STANDARD PROCEDURE .
  4. Install the left inner splash shield. Refer to SHIELD, SPLASH, FRONT WHEELHOUSE, REMOVAL AND INSTALLATION .
  5. Install the left front wheel and tire assembly. Refer to REMOVAL AND INSTALLATION .
scientia non olet · About LEMON Manuals