LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1303 (948TE Automatic Transmission (Service Information)) >> Technical Specifications >> Torque Specifications

Torque Specifications

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
DESCRIPTION N.m Ft. Lbs. In. Lbs. COMMENT
Gear Shifter Plate to Floor Pan Bolts 9   80  
Transmission Bolts 70 52 -  
Flexplate to Crankshaft Bolts 29 + 51° 21 + 51° - Do not reuse these fasteners. If removed, a NEW  fastener must be installed and tightened to specifications.
Flexplate to Torque Converter Bolts 40 30 -  
948TE INTERNAL TIGHTENING SPECIFICATIONS

DESCRIPTION N.m Ft. Lbs. In. Lbs. COMMENT
Bolt and Washer Assembly - Bellhousing to Bearing Support 25 18 -  
Bellhousing to Case Bolts 31 23 -  
Bellhousing Plug 23 17 -  
Cover to Case Bolts 15 11 -  
Cover Plate to Valve Body Screws 6 - 53  
Detent Spring to Case Bolts 11 8 -  
Dog A Washer to Dog A Inner Piston Screw 2.8 - 25  
Drain Plug 35 26 -  
Filter to Intermediate Plate Support Screw 10 - 88  
Fitting Assembly - Oil Cooler Line 30 22 -  
Inner to Outer Valve Body Bolts 6 - 53  
Intermediate Plate to Bell Screws 10 - 88  
Oil Baffle to Bellhousing Screw 10 - 88  
Oil Supply Tube Bolts 10 - 88  
Output Gear Support to Gear Bearing 60 49 -  
Bolt - Pan to Case- Oil 10 - 88  
Bolt - Park Guide 4 + 21° - 35 + 21°  
Park Support to Case Bolt 13 - 111  
Ring Gear to Differential Bolts 180 133 -  
Pump Plate to Bellhousing Bolts 25 18 -  
Valve Body to Case Bolts 8 - 71  
Valve Body Bolts 6 - 53  
Bolt and Washer Assembly - Bellhousing to Intermediate Shaft 25 18 -  
Stake-Nut 60 49 -  
Plug - Oil Fill 23 17 -  
Solenoid Wire Harness Connector to Valve Body Screws 6 - 51  
Solenoid Retaining Plate to Valve Body Screws 6 - 53  
Speed Sensor to Transmission Case Bolt 6 - 53