Removal And Installation: Installation
WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
LEFT SIDE
- Install the lower load beams (2) and install the bolts (1).
- Tighten the bolts (1) to the proper specification. Refer to TECHNICAL SPECIFICATIONS .
- Install the bolts (1) attaching the pedestrian impact crossmember to the lower load beam.
- Tighten the bolts (1) to the proper specification. Refer to TECHNICAL SPECIFICATIONS .
- Position the reinforcement brackets (1b) back into place, install the bolts (1a).
- Tighten the bolts (1a) to the proper specification.
Refer to TECHNICAL SPECIFICATIONS .
- Install the front fascia. Refer to FASCIA, FRONT, INSTALLATION .
- Install the belly pan. Refer to BELLY PAN, INSTALLATION .
RIGHT SIDE
- Install the lower load beams (2) and install the bolts (1).
- Tighten the bolts (1) to the proper specification. Refer to TECHNICAL SPECIFICATIONS .
- Install the bolts (1) attaching the pedestrian impact crossmember to the lower load beam.
- Tighten the bolts (1) to the proper specification. Refer to TECHNICAL SPECIFICATIONS .
- Position the reinforcement brackets (1b) back into place, install the bolts (1a).
- Tighten the bolts (1a) to the proper specification.
Refer to TECHNICAL SPECIFICATIONS .
- Install the front fascia. Refer to FASCIA, FRONT, INSTALLATION .
- Install the belly pan. Refer to BELLY PAN, INSTALLATION .