LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1287 (Frame And Bumpers) >> Frame >> CROSSMEMBER, Pedestrian Impact >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the pedestrian impact crossmember and install the nuts (1) and tighten securely.
  2. Install the bolts (2) tighten the bolts to the proper specification. Refer to TECHNICAL SPECIFICATIONS .
  3. Install the front fascia. Refer to FASCIA, FRONT, INSTALLATION  .
scientia non olet · About LEMON Manuals