LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1287 (Frame And Bumpers) >> Bumpers >> Reinforcement, Bumper, Front >> Removal And Installation >> Installation - 1.3L

Installation - 1.3L

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
GC0189734Courtesy of CHRYSLER GROUP, LLC
  1. Install the bumper reinforcement (1c).
  2. Install the fasteners (1a) and (1b) and tighten to the proper specification. Refer to TECHNICAL SPECIFICATIONS .
  3. Install the front fascia. Refer to FASCIA, FRONT, INSTALLATION  .
scientia non olet · About LEMON Manuals