LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1287 (Frame And Bumpers) >> Bumpers >> Fascia, Rear >> Disassembly And Assembly >> Assembly

Disassembly And Assembly: Assembly

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the fascia extensions and seat the retainers fully.
  2. Tighten the screws.
  3. Install the reflector and tighten the screws.
  4. Install the rear fog lights. Refer to REAR FOG LAMP, INSTALLATION .
  5. Install the rear fascia. Refer to FASCIA, REAR, INSTALLATION  .
scientia non olet · About LEMON Manuals