LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1287 (Frame And Bumpers) >> Bumpers >> Bracket, Fascia Support, Front >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
GC0189216Courtesy of CHRYSLER GROUP, LLC
  1. Install the bracket (1b) onto the fascia and install the push pins (1a).
  2. Install the front fascia. Refer to FASCIA, FRONT, INSTALLATION  .
scientia non olet · About LEMON Manuals