LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1286 (2.4L Engine (Service Information)) >> Lubrication >> Valve, Oil Pressure Relief >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
GC0121339Courtesy of CHRYSLER GROUP, LLC
  1. Lightly coat the pressure regulating valve with clean engine oil and install valve (4).
  2. Install the spring (3) and cap (2).
  3. Tighten the cap to the proper specification. Refer to TORQUE SPECIFICATIONS  .
  4. Install the oil pan. Refer to PAN, OIL, REMOVAL AND INSTALLATION  .
scientia non olet · About LEMON Manuals