Installation - Rear Fuel Delivery Line - 2.4L
WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
- Position the rear fuel delivery tube (1) to the vehicle underbody.
- Engage the rear fuel delivery tube (1) with the retaining clips on the underbody.
- Connect the rear fuel delivery tube front quick coupling (1).
- Position the front and rear fuel tube shields to the underbody then install and tighten the screws (1) that secure it. Tighten the screws securely.
- Install the fuel tank into the vehicle. Refer to TANK, FUEL, INSTALLATION .
- Install the side belly pan onto the underbody of the vehicle. Refer to BELLY PAN, SIDE, INSTALLATION .
- Remove the support and lower the vehicle.