LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1284 (1.3L Fuel System) >> Fuel Injection >> Sensor, Crankshaft Position >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the starter. Refer to STARTER, REMOVAL .
    GC0186986Courtesy of CHRYSLER GROUP, LLC
  2. Disconnect the wire harness connection (1) for the engine crankshaft position sensor.
  3. Remove the screw (2) and remove the crankshaft position sensor.
scientia non olet · About LEMON Manuals