LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2018 >> Grand Cherokee Laredo, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 28 (6.2L Engine (Service Information)) >> Valve Timing >> Cover(S), Engine Timing >> Removal

Cover(S), Engine Timing: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the oil pan. Refer to PAN, OIL, REMOVAL .
  2. Remove the support and lower the vehicle.
  3. Remove the water pump. Refer to PUMP, WATER, REMOVAL .
    GC0170371Courtesy of CHRYSLER GROUP, LLC
  4. Disconnect the camshaft position sensor wire harness connector (1).
  5. Remove A/C compressor from the front timing chain cover and position aside. Refer to COMPRESSOR, A/C, REMOVAL .
  6. Remove the generator from the front timing chain cover and position aside. Refer to GENERATOR, REMOVAL .
  7. Remove the vibration damper. Refer to DAMPER, VIBRATION, REMOVAL .
    GC0170372Courtesy of CHRYSLER GROUP, LLC
  8. Remove the engine timing cover retaining bolts (1) and remove the engine timing cover (1).
scientia non olet · About LEMON Manuals