LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2018 >> Grand Cherokee Laredo, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 28 (6.2L Engine (Service Information)) >> Supercharger System >> TENSIONER, Drive Belt >> Installation

TENSIONER, Drive Belt: Installation

WARNING: This page is about a different variant/trim than selected.
GC0170486Courtesy of CHRYSLER GROUP, LLC
  1. If removed, install the tensioner mounting bracket and tighten the retaining bolts (1) to the proper torque specifications. Refer to TORQUE SPECIFICATIONS .
  2. Install the belt tensioner to bracket retaining bolt (3) and tighten to the proper torque specifications. Refer to TORQUE SPECIFICATIONS .
  3. Install the supercharger drive belt (2). Refer to BELT, DRIVE, INSTALLATION .
  4. Install the accessory drive belt. Refer to BELT, SERPENTINE, INSTALLATION .
scientia non olet · About LEMON Manuals