LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2018 >> Grand Cherokee Laredo, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 28 (6.2L Engine (Service Information)) >> Supercharger System >> Belt, Drive >> Installation

Belt, Drive: Installation

WARNING: This page is about a different variant/trim than selected.
GC0170495Courtesy of CHRYSLER GROUP, LLC
  1. Position the drive belt (2) over all pulleys, except for the idler pulley.
  2. Rotate the tensioner (1) clockwise  and slip the belt over the idler pulley.
  3. Gently release tensioner.
scientia non olet · About LEMON Manuals