LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2018 >> Grand Cherokee Laredo, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (3.0L Turbo Diesel (Service Information)) >> Lubrication >> Jet, Piston Oil Cooler >> Removal

Jet, Piston Oil Cooler: Removal

WARNING: This page is about a different variant/trim than selected.
CAUTION:

Use caution when removing and installing oil jets. Damage to oil jet nozzle could cause severe engine damage.

GC0146759Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate negative the battery cable.
  2. Remove the crankshaft. Refer to CRANKSHAFT, REMOVAL .
  3. Remove the bolt (2) and oil jet (1).
scientia non olet · About LEMON Manuals