LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2018 >> Grand Cherokee Laredo, RWD >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> Propeller Shaft >> Shaft, Drive, Front >> Removal

Shaft, Drive, Front: Removal

NOTE:

Propeller shaft is serviced as an assembly only.

  1. Place the vehicle on floor or drive-on hoist with full weight of vehicle on suspension.
  2. Shift the transmission and transfer case (2) in to Neutral.
  3. If equipped, remove the skid plate. Refer to PLATE, SKID, FRONT SUSPENSION .
  4. Support the transfer case with a jack stand and remove the transmission cross-member. Refer to CROSSMEMBER, TRANSMISSION, REMOVAL .
  5. Mark a line across the Constant Velocity (CV) joints to companion flanges for installation reference.
  6. Remove the bolts from CV joints.
  7. Push the propeller shaft forward to clear the transfer case companion flange and remove the shaft.
scientia non olet · About LEMON Manuals