Belt, Serpentine: Removal: 2.4L
WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the engine cover.
- Remove the air cleaner body. Refer to BODY, AIR CLEANER, REMOVAL .
- Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE
.
- Remove the serpentine belt (5). Refer to BELT, SERPENTINE, REMOVAL .
- Remove the lower tensioner bolt.
- Lower the vehicle.
- Using a 12 inch socket extension, access the tensioner upper bolt from between the catalytic converter and the engine block.
- Remove the upper bolt.
- Remove the belt tensioner (7) from the engine.