LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Wrangler Sahara, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (3.2L Engine (Service Information)) >> Engine Mounting >> Insulator, Engine Mount, Right >> Removal

Insulator, Engine Mount, Right: Removal

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the air filter body. Refer to BODY, AIR CLEANER, INSTALLATION .
    GC0160005Courtesy of CHRYSLER GROUP, LLC
  2. Remove the coolant return line retainer from the clean air hose.
  3. Remove the clean air hose (2) from the resonator.
  4. Remove the overflow bottle from the mount and position aside.
  5. Raise the vehicle.
  6. Remove the belly pan. Refer to BELLY PAN, REMOVAL .
  7. Lower the vehicle.
  8. Carefully position a floor jack under the engine for support.
    GC0158452Courtesy of CHRYSLER GROUP, LLC
  9. Remove the engine mount (1) to frame bolts (4).
  10. Loosen the engine mount to strut tower bolt (5).
  11. Remove the center engine mount to engine bracket bolt (3).
  12. Remove the outer engine mount to engine bracket bolts (2).
    GC0159456Courtesy of CHRYSLER GROUP, LLC
  13. If required, remove the engine mount bracket (1) to timing cover bolts (2).
scientia non olet · About LEMON Manuals