Shock Absorber, Suspension: Assembly

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of CHRYSLER GROUP, LLC

CAUTION:

Do not use any type of pliers on the chrome machined surface of shock/strut rod to assist in the disassembly/assembly of shocks or struts. Use only tools designed to hold the shock/strut rod stationary when servicing shock or strut components.

NOTE:

View is typical

Courtesy of CHRYSLER GROUP, LLC

Place the dust shield (3) over the shock body (4).
Install the upper shock mount (2) and install the retaining nut (1). Using a Universal Strut/shock kit or equivalent, select the 5.2MM Double D and the 17MM socket, tighten the nut to 30 N.m (22 ft. lbs.).
Install the shock in the vehicle
Refer to SHOCK ABSORBER, SUSPENSION, INSTALLATION .