Sensor, Oil Temperature: Installation
WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- The oil temperature sensor gasket (1) can be reused if not damaged. Lightly lubricate the sensor threads with clean engine oil.
- Use an appropriate socket (2) and install the oil temperature sensor (1). Tighten the oil temperature sensor to the proper specification. Refer to TORQUE SPECIFICATIONS
.
- Engage the oil temperature harness connector to the bracket (1).
- Connect and lock the oil temperature sensor harness connector (2).
- Install the clean air hose and engine cover.
- Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
- Start engine and check for leaks.