LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Wrangler Sahara, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (2.4L Engine (Service Information)) >> Engine Block >> Damper, Vibration >> Installation

Damper, Vibration: Installation

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
GC0121273Courtesy of CHRYSLER GROUP, LLC
  1. Apply clean engine oil to the vibration damper bolt threads and between the bolt head and washer.
  2. Install the vibration damper and vibration damper bolt. Use (special tool #9707, Holder, Vibration Damper) (1) and tighten the bolt to the proper specification. Refer to TORQUE SPECIFICATIONS  .
  3. Install the accessory drive belt. Refer to BELT, SERPENTINE, INSTALLATION .
scientia non olet · About LEMON Manuals