Rocker Arm, Valve: Removal

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

If the rocker arms are to be reused, identify their positions so that they can be reassembled into their original locations.

Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
Remove the rocker arm(s).
- If the exhaust rockers are to be serviced, remove the exhaust camshaft. Refer to REMOVAL .
- If the intake rockers are to be serviced, remove the Variable Valve Actuator Assembly (VVAA). Refer to ASSEMBLY, VARIABLE VALVE ACTUATION, REMOVAL .