Pipe, Exhaust: Installation
WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Using NEW gaskets, install the exhaust Y-pipe (1) and tighten rear catalytic converter to the exhaust Y-pipe nuts (5) to 26 N.m (19 ft. lbs.).
- Install the nuts (3) securing the cross under pipe (1) to the exhaust Y-pipe (4) and tighten to 26 N.m (19 ft. lbs.).
- Install the Y-pipe (4) isolator bolts and tighten to 28 N.m (21 ft. lbs.).
- Install the exhaust resonator. Refer to RESONATOR, EXHAUST, INSTALLATION .
- Check for clearance of the exhaust to body.
- Install the belly pan. Refer to BELLY PAN, INSTALLATION .