LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Wrangler Sahara, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Automatic Transmission (Service Information)) >> Cover >> Removal

Section 28 (Automatic Transmission (Service Information)): Cover: Removal

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and properly support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Remove the left front tire and wheel assembly. Refer to REMOVAL .
  3. Remove the left front fender splash shield. Refer to SHIELD, SPLASH, REAR WHEELHOUSE, REMOVAL .
    GC0173331Courtesy of CHRYSLER GROUP, LLC
  4. Remove the eleven cover plate bolts (1) and the cover plate (2).
  5. Clean the mating surfaces.