LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Wrangler Sahara, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Body - Interior & Exterior) >> Exterior >> Shield, Splash, Rear Wheelhouse >> Removal

Shield, Splash, Rear Wheelhouse: Removal

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
GC0176913Courtesy of CHRYSLER GROUP, LLC
  1. Raise and support the vehicle, Refer to HOISTING, STANDARD PROCEDURE .
  2. Remove the wheel from the side of the vehicle being serviced. Refer to REMOVAL .
  3. Remove the push pins (3) from the splash shield (2).
  4. Remove the fasteners (1) securing the splash shield (2) to the fascia and wheelhouse.
  5. Remove the rivet (4).
  6. Release the outboard edge of the splash shield (2) from the body side flange.
  7. Remove the splash shield (2) from the vehicle.
scientia non olet · About LEMON Manuals