LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Wrangler Sahara, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Frame And Bumpers) >> Bumpers >> Reinforcement, Bumper, Rear >> Installation >> Standard Bumper

Standard Bumper

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
GC0159330Courtesy of CHRYSLER GROUP, LLC
  1. Position rear bumper reinforcement (3) on vehicle.
  2. Install nuts (1) attaching the bumper reinforcement to frame rail.
  3. Tighten nuts (2) to 28 N.m (21 ft lbs).
  4. Install rear fascia. Refer to FASCIA, REAR, INSTALLATION .
scientia non olet · About LEMON Manuals