Frame, Seat Back, Rear: Removal
WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
60% rear seat shown, similar procedure for 40% rear seat back frame.
- Remove the rear seat back cover Refer to COVER, REAR SEAT BACK, 60%, REMOVAL .
- Remove the cable (1) from the seat mechanism.
- Remove the bolt and screws (1), then the bracket (2).
- Fold the seat back (1) down fully, remove the bolts (2) on both sides of the seat and remove the seat back frame.