Striker, Latch: Installation
WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Position the liftgate latch striker (2) to the inside of the liftgate opening lower panel and align using the marks made during removal.
- Install and tighten the two screws (1) that secure the latch striker to the liftgate opening lower panel. Tighten the screws to 28 N.m (21 ft. lbs.).
- Adjust the latch striker position as necessary to achieve proper liftgate latch operation.
- Install the liftgate sill scuff plate. Refer to PLATE, SCUFF, LIFTGATE, INSTALLATION .
- Check and adjust the striker if necessary. Refer to STRIKER, LATCH, ADJUSTMENTS .