Striker, Latch: Adjustments
WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Remove liftgate scuff trim, Refer to PLATE, SCUFF, LIFTGATE, REMOVAL .
- Using a grease pencil or equivalent, mark the position of the striker (1) to aid in adjustment.
- Loosen the striker bolts (2).
- Change the striker position to adjust the lower liftgate gap and flush measurement, Refer to GAP AND FLUSH, SPECIFICATIONS
- Tighten the bolts to 28 N.m (21 ft. lbs.).