LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Wrangler Sahara, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Body - Interior & Exterior) >> DECKLID / Hatch / Liftgate / Tailgate / Swing Gate >> Latch, Liftgate >> Installation

Latch, Liftgate: Installation

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
GC0159357Courtesy of CHRYSLER GROUP, LLC
  1. Install the latch (2) to the lift gate (1).
  2. Install the three bolts (3) to the lift gate latch (2) and tighten the bolts to 9 N.m (80 in. lbs.).
  3. Connect the electrical connectors.
  4. Install the liftgate trim panel. Refer to PANEL, TRIM, INSTALLATION .
scientia non olet · About LEMON Manuals