LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Wrangler Sahara, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Lamps/Lighting - Exterior (Service Information)) >> Lamp, Center High Mounted Stop >> Removal

Lamp, Center High Mounted Stop: Removal

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
GC0159417Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the rear spoiler from the vehicle. Refer to SPOILER, REMOVAL .
  3. Working from the back of the rear spoiler, remove the support bracket (2), the washer nozzle hose from the nozzle and the washer nozzle itself (3).
  4. Disconnect the electrical connection (4) from the back of the CHMSL assembly.
  5. Remove five screws (5) that secure the CHMSL to the spoiler assembly.
  6. Remove the CHMSL assembly from the spoiler.