Tube(S), Fuel: Removal: 2.4L
WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - Fuel Line |
| 2 - Quick disconnect at body mounted fuel line bundle |
| 3 - Quick disconnect at fuel rail |
WARNING:
The fuel system is under constant pressure even with engine OFF. Until the fuel pressure has been properly relieved from the system, do not attempt to open the fuel system.
- Release the fuel system pressure. Refer to FUEL SYSTEM PRESSURE RELEASE PROCEDURE .
- Disconnect and isolate negative battery cable.
- Remove engine cover.
- Disconnect the fuel line quick connect fitting (2) from the body mounted fuel line bundle. Refer to FITTING, QUICK CONNECT .
- Disconnect the fuel line quick connect fitting (3) from the fuel rail. Refer to FITTING, QUICK CONNECT .
- Disengage fuel line retainer from valve cover mounting stud and remove fuel line (1) from vehicle.