Camshaft - Removal

CAMSHAFT





1. Remove the battery negative cable.
2. Remove the air cleaner assembly.
3. Drain coolant Service and Repair.
4. Remove the accessory drive beltAccessory Drive Belt - Removal.
5. Remove the generator.
6. Remove the A/C compressor, and set aside.
7. Remove the radiator Radiator - Removal.
8. Remove intake manifold Intake Manifold - Removal.
9. Remove cylinder head coversCylinder Head Cover - Removal.




10. Remove both left and right cylinder heads (4)Cylinder Head - Removal.
11. Remove the oil panEngine Oil Pan - Removal.




12. Remove timing case cover (1)Timing Cover - Removal.
13. Remove the oil pick up tube.




14. Remove the oil pump Engine Oil Pump - Removal.




15. Remove timing chain (2) Timing Chain & Sprockets - Removal.
16. Remove camshaft tensioner/thrust plate assembly.




NOTE: Identify lifters to ensure installation in original location.

17. Remove the tappets (2) and retainer (1) assembly.




18. Install a long bolt into front of camshaft to aid in removal of the camshaft. Remove camshaft, being careful not to damage cam bearings with the cam lobes.