LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Wrangler X, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior >> Sport Bar - Speaker Pod >> Removal

Sport Bar - Speaker Pod: Removal

  1. On vehicles equipped with a soft top, unzip the side panel next to the pod.
  2. On vehicles equipped with a hard top, unclip the windshield clamps.
  3. Remove the bolts on side of the top next to the pod and loosen the opposite side bolts. (Refer to BODY/REMOVABLE TOP/HARD TOP - REMOVAL) .
  4. Lift up the side of the top to gain access to the pod bolts and support with a block of wood or similar.
  5. Remove the two bolts securing the pod to the sport bar.
  6. Separate the pod guide pin from the sport bar and disconnect the electrical connector.
scientia non olet · About LEMON Manuals