LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Wrangler X, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior >> Center Console >> Installation

Center Console: Installation

  1. Connect the electrical connector and install console tower assembly over the park brake lever, if equipped.
  2. Install the tower bolts.
  3. Install the mini console assembly over the transmission and transfer case shifters.
  4. Install the console bolts.
  5. Connect the air bag deactivation switch electrical connector and install the switch, if equipped.
  6. Connect the air bag deactivation switch electrical connector and install the switch, if equipped.
  7. Install the auto transmission shift bezel, if equipped. (Refer to BODY/INTERIOR/SHIFT BEZEL - INSTALLATION) .
  8. Install the manual transmission shift boot, if equipped. (Refer to BODY/INTERIOR/SHIFT BOOT - INSTALLATION) .
  9. Install the cup holder and trim disc, if equipped. (Refer to BODY/INTERIOR/CENTER CONSOLE CUPHOLDER ASSEMBLY - INSTALLATION) .
scientia non olet · About LEMON Manuals