LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Wrangler X, Standard >> Repair and Diagnosis >> Electrical >> Gauges >> Body - Interior & Exterior >> Shift Boot >> Installation

Shift Boot: Installation

  1. Slide the shift boot over the shift lever.
  2. Snap the shift boot into place in the center console.
  3. Position the shift knob on the lever, install the nut and tighten to 34 N.m (25 ft. lbs.).
  4. Position the shift pattern insert on the knob and press into place.
scientia non olet · About LEMON Manuals