LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior >> Seats >> Seat-Third Row >> Removal

Seat-Third Row: Removal

Fig 1: Remove/Install Load Floor
GC0044975Courtesy of DAIMLERCHRYSLER CORP.
  1. Remove the cargo load floor (1) (Refer to BODY/INTERIOR/LOAD FLOOR - REMOVAL) .
    Fig 2: Remove/Install Seat
    GC0044987Courtesy of DAIMLERCHRYSLER CORP.
  2. Remove the inner nut and bolt (2).
  3. Remove the outer nuts (3).
  4. Lift seat assembly up off of the studs (1) and release the front hooks from the strikers (4).
  5. Remove the seat.
    Fig 3: Seat Belt Lower Anchor And Trim
    GC0044473Courtesy of DAIMLERCHRYSLER CORP.
  6. Remove the bolt (5) and remove the lower seat belt anchor (4).
scientia non olet · About LEMON Manuals