LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, RWD >> Repair and Diagnosis >> Electrical >> Gauges >> Body - Interior & Exterior >> Interior >> Load Floor >> Removal

Load Floor: Removal

Fig 1: Remove/Install Load Floor
GC0044975Courtesy of DAIMLERCHRYSLER CORP.
  1. Remove the liftgate scuff plate, (Refer to BODY/INTERIOR/LIFTGATE SCUFF PLATE - REMOVAL) .
  2. Remove the two nuts that secure the load floor to the floor panel.
  3. Remove the load floor.
scientia non olet · About LEMON Manuals