Transmission Solenoid/TRS Assembly: Removal

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Valve Body Assembly

Courtesy of DAIMLERCHRYSLER CORP.

1 - VALVE BODY TO CASE BOLT (6)

Remove the valve body from the transmission. See Fig 1.(Refer to TRANSMISSION/AUTOMATIC - 45RFE/545RFE/VALVE BODY - REMOVAL)

Fig 2: Transmission Solenoid/TRS Assembly Bolts
Courtesy of DAIMLERCHRYSLER CORP.

1 - SOLENOID PACK BOLTS (15)
Remove the bolts (1) holding the transmission solenoid/TRS assembly onto the valve body. See Fig 2.
Separate the transmission solenoid/TRS assembly from the valve body.