LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler X, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior >> Seats >> Rear Seat Release Cable >> Removal

Rear Seat Release Cable: Removal

  1. Remove the seat. (Refer to BODY/SEATS/REAR SEAT - REMOVAL) 
  2. Remove the screws and remove the seat back release handle bezel. See Figure.
  3. Release the j-clips at the bottom of the seat back and remove the seat cover.
  4. Disconnect the cables at the seat back hinges. See Figure.
  5. Position the seat back cushion aside and remove the screws. See Fig 1.
  6. Remove the seat back release cable assembly.
Fig 1: RELEASE CABLE ASSEMBLY
GC0030671Courtesy of DAIMLERCHRYSLER CORP.
1 - SEAT BACK FRAME
2 - RELEASE CABLE ASSEMBLY HANDLE
3 - SCREWS
scientia non olet · About LEMON Manuals