Section 596 (DTCS 82 To B105A)
WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Diagnosis And Testing
- 82-Sensor Too Cold To Start Cooldown Test (MTC)
- 83-Sensor Failed Open During Cooldown Test (MTC)
- 84-Sensor Failed Shorted During Cooldown Test (MTC)
- 85-Blower Not On High During Cooldown Test (MTC)
- B10AA-Right Blend Door Control Circuit Low (ATC)
- B10AB-Right Blend Door Control Circuit High (ATC)
- B10AC-Right Blend Door Control Circuit Open (ATC)
- B10AD-Right Blend Door Travel Range Too Small (ATC)
- B10AE-Right Blend Door Travel Range Too Large (ATC)
- B10AF-Right Blend Door Actuator Performance (ATC)
- B10A0-Panel Mode Door 2 Travel Range Too Large (ATC)
- B10A1-Panel Mode Door 2 Actuator Performance (ATC)
- B10A2-Left Blend Door Control Circuit/Performance (ATC)
- B10A3-Left Blend Door Control Circuit Low (ATC)
- B10A4-Left Blend Door Control Circuit High (ATC)
- B10A5-Left Blend Door Control Circuit Open (ATC)
- B10A6-Left Blend Door Travel Range Too Small (ATC)
- B10A7-Left Blend Door Travel Range Too Large (ATC)
- B10A8-Left Blend Door Actuator Performance (ATC)
- B10A9-Right Blend Door Control Circuit/Performance (ATC)
- B10B0-Infrared Sensor Thermistor Circuit Low (ATC)
- B10B1-Infrared Sensor Thermistor Circuit High (ATC)
- B10B2-A/C Cool Down Test Performance (ATC)
- B100A-RECIRCULATION Switch Request Input Circuit Low (ATC)
- B105A-RECIRCULATION Door Control Circuit High (ATC)